Combining bush hammering textures and C2 densifiers for long-lasting safer surfaces.
The PeterFell Texture Safe System allows you to create a safer, non-slip concrete surface for virtually any environment, from residential pool surrounds to public spaces with high foot traffic.
Texture Safe isn’t an applied anti-slip application – it’s a permanent texture created to the concrete’s surface.
A process called Bush Hammering utilising specialised tooling from PeterFell is used to texture the concrete surface. This creates an even non-slip texture and enhances the concretes appearance. Because it’s an integral part of the concrete, the texture will last, ensuring your surface remains safe and slip-free for generations.
The durability of the System is enhanced by applying our C2 densifier that penetrates deep into the pores of the concrete. This makes the concrete surface even harder, which in turn helps retain the texture profile.
The PeterFell Texture Safe System offers a range of slip resistant options. All of these meet the AS/NZS 3661.1 1993 “Slip resistance of pedestrian surfaces” standards.
Suitable for a range of applications.
Versatility is a key benefit of the PeterFell Texture Safe System.
The PeterFell Texture Safe System can be used on concrete both old and new. It is not only suitable for horizontal spaces, it can be applied to pre-cast walls and other vertical surfaces.
And it’s not just for concrete. The PeterFell Texture Safe System can be applied to granite, marble and masonry.
Texture Safe can be used in conjunction with other elements of the PeterFell System, such as cutting the concrete to create a unique pattern or design. If you’re using The PeterFell Texture Safe System on a new concrete floor, you can also include one of our colour oxides. With over 80 colours to choose from, there’s plenty of scope to create a look that is distinctly your own.
- Access routes
- Concrete ramps and inclines
- Public spaces
- Swimming pool surrounds
- Non-slip strips on stairs
- Pattern concrete walls
- Remedial resurfacing
- Replacing existing concrete surface coatings
Why it makes sense to use Texture Safe to create a non-slip surface.
Texture that lasts.
Texture Safe isn’t a surface coating – it is ground into the concrete itself. Because it is an integral part of the concrete, it will last for generations. The system also uses our C² lithium densifiers to create a permanent texture.
The PeterFell Texture Safe System offers a range of slip resistant options. All of these meet the AS/NZS 3661.1 1993 “Slip resistance of pedestrian surfaces” standard.
More durable surface.
The concrete surface is also improved by applying a C² densifier which hardens the concrete, increases durability and prolongs texture profile.
Easy to maintain.
Use on new and existing surfaces.
Several texture options.
Flexibility of design.
Texture commercial spaces.
Consistent and attractive appearance.
Simply choose a texture and type of protection that suits your project.
There are three texture options in the PeterFell Texture Safe System, created with the appropriate Abujardar tooling.
PeterFell Texture Safe Fine (PFTSF)
PeterFell Texture Safe Medium (PFTSM)
PeterFell Texture Safe Coarse (PFTSC)
There are three types of protective finishes that can be applied in the PeterFell Texture Safe System. The Natural finish can be applied to all texture options. In this finish, the surface is first treated with our lithium silicate densifier (C2 Hard), increasing surface hardness and durability. The penetrating sealer PFL Texture Seal Natural is then applied, protecting the surface from ingression of dirt and soil without altering the surface texture or appearance. The other two finishes enhance the offer a hard wearing surface protection with an enhanced ‘wet-look’ finish. The textured surface, with the exception of the fine texture (PFTSF), is treated with either PFL Texture Seal Gloss for a gloss finish, or PFL Texture Seal Matt for a matt finish. These two sealers offer excellent protection form staining and marking, making the textured surface easy to clean and maintain.
Note: PFL Texture Seal NATURAL Sealer is the only protection that can be used on fine surfaces textured with PeterFell Texture Safe (PFTSF) finishes. PFL Texture Seal GLOSS and PFL Texture Seal MATT reduce the slip-resistance on the fine texture only and subsequently cannot be applied.
PFL Texture Seal NATURAL is applied, providing non-coating protection against soil and dirt ingression while retaining a natural finish.
Wet-look gloss finish
PFL Texture Seal GLOSS is applied, providing a hard-wearing trafficable barrier that enhances the surface with a wet-look finish.
Wet-look matt finish
PFL Texture Seal MATT is applied, providing a hard-wearing trafficable barrier that has enhances the surface with a wet-look finish that contains a matting agent to reduce glare.
A certified non-slip surface that’s easy to maintain.
The PeterFell Texture Safe System offers a range of slip resistant options.
The PeterFell Texture Safe System is certified and meets all the AS/NZS 3661.1 1993 “Slip resistance of pedestrian surfaces” standard.
A PeterFell sealer is applied once the texture is created. This not only protects the concrete against staining or marking, it also makes it easier to clean and maintain.
This same protective coating adds lustre to the surface for added visual appeal.
European quality Abujardar Bush Hammer tooling now available.
Quality has always been important to us. That’s why we’re proud to distribute the Abujardar range of bush hammer tooling.
Abujardar has been in the bush hammer tooling business for over 25 years. Continued innovation has made their products the best performers in the market. The quality and performance of the tooling means they last longer. As a result, Abujardar tools provide some of the lowest costs per square metre in the world.