PFL Surface Conditioner

Used as a primer when re-coating existing surfaces sealed with PFL Glaze Sealer and PFL Satin Sealer.

It facilitates the bond between the old and the new sealer.

View product guide

View safety data sheet

PFL Surface conditioner for concrete surfaces

How much you’ll need.

The following estimates are offered in good faith but the final quantity may be be more or less depending on the concrete. They are conservative numbers, not because we are trying to sell more, but because most clients don’t want to have to order twice.

Also note it is often easier to buy a single unit than the two smaller ones (eg buying 1x20L is cheaper than buying a 1x10L & 1x5L), and we so have put in the cheapest options. Any excess can be kept or used to apply a third coat.

Concrete Area (m2)
0m2
0m2

Estimated amount of PFL Surface Conditioner needed = 32L

You will need:

10 2L 1 x 2L
20 4L 2 x 2L
30 6L 1 x 5L, 1 x 1L
40 10L 1 x 10L
50 10L 1 x 10L
60 12L 1 x 10L, 1 X 2L
70 15L 1 x 10L, 1 x 5L
80 20L 1 x 20L
90 20L 1 x 20L
100 20L 1 x 20L
120 24L 1 x 20L, 2 x 2L
140 30L 1 x 20L, 1 x 10L
160 35L 1 x 20L, 1 x 10L, 1 x 5L
180 40L 2 x 20L
200 40L 2 x 20L

Order your PFL Surface Conditioner.

Please note that the following prices exclude GST and freight. These are calculated when you work through your order.

Size Price
Testpot $7.65
1L $30.05
2L $43.90
5L $98.20
10L $173.25
20L $288.75
200L P.O.A.

Quantity: x

Check out our Sealer Auxiliary products to aid you with your project.